#DIYPS findings can help people with type 1 diabetes, regardless of tech, better manage post-meal blood glucose

Over the past few months, while developing #DIYPS, we have discovered a few things about mealtime blood glucose (BG) levels that we thought would be worth sharing more broadly. Using the insights, tips, and techniques below, it should be possible for many people with type 1 diabetes to more effectively keep their post-meal (post-prandial) BG levels in range. Here’s what we’ve learned…

After an initial carb absorption delay…

When carbohydrates are consumed, as part of a meal or snack, or to correct a low-blood-glucose (BG) situation, it causes BG to rise, but that rise is both delayed and gradual. In developing #DIYPS’s model, we discovered that for n=1, there is a delay of approximately 15 minutes between carb consumption and when BG starts to rise (as measured by a Dexcom G4 CGM, which actually measures subcutaneous interstitial-fluid glucose levels).

Subsequent carb absorption rate is constant…

In addition, we discovered that the rate at which BG rises after carb consumption is fairly constant, both across food types and over time. For n=1, we observed that carbohydrates are digested and absorbed at a rate of approximately 30g/hour (0.5g/minute), and that this rate is relatively constant beginning after the initial 15-minute lag, and lasting until the last of the carbs are absorbed (up to 4 hours later, in the case of a large 120-carb meal).

Regardless of glycemic index…

We also observed that, for real-world meals, glycemic index (GI) doesn’t matter much for carb absorption rate. Our initial testing was performed on high-GI foods used to correct low BG (juice and Mountain Dew) and a milkshake consumed without corrective insulin while participating in an unrelated clinical trial (to try to detect any endogenous insulin production, which was not present). However, in subsequent real-world use of #DIYPS, we’ve observed the same for almost all meal types. It seems that for meals containing at least some sugar, starch, or other highly accessible form of carbohydrates, the body seems to begin digesting and absorbing the most accessible carbs immediately, and is able to break down low-glycemic-index carbohydrates by the time the higher-GI foods are absorbed.

Additionally, insulin activity at mealtime matters a lot…

While developing and testing #DIYPS (and working to bring A1c down a full percentage point), we also observed that the level of insulin activity at the start of a meal matters a great deal in determining whether BG rises significantly as the meal carbs are absorbed by the body.

Pre-boluses can help…

One fairly common technique for dealing with this, among people with type 1 diabetes, is the pre-bolus. This generally means estimating insulin requirements for an upcoming meal, and bolusing or injecting fast-acting insulin approximately 15 minutes before the meal. Such pre-boluses do help somewhat in preventing large spikes in BG immediately after meals, but in our experience an 80-point BG rise (from 80mg/dl to 160mg/dl, for example) is still common for meals consumed “on an empty stomach” with little or no extra insulin on board (IOB) prior to the pre-bolus.

But pre-bolusing can sometimes be dangerous…

Also, pre-bolusing can contribute to dangerously low BG (hypoglycemia) if a meal is delayed or if you end up eating fewer carbs than expected.

And what really matters is not IOB, but insulin activity…

Based on observing the differences in post-meal (post-prandial) BG between empty-stomach meals and those where insulin was already on board and at full activity from small snacks or correction boluses 1-2h prior to the meal[1], it appears that what actually makes the most difference for post-meal BG is not how much insulin is on board (IOB) at the start of meal time, but rather how much insulin has already been absorbed into the bloodstream and is at full activity.

Because the liver needs insulin when the carbs first hit…

When carbohydrates are initially absorbed by the small intestine, they are directed into the portal vein and pass through the liver before reaching the rest of the body’s circulatory system. The liver is designed to absorb any excess glucose out of the blood at that point, storing it for later release. The mechanism by which the liver does so is dependent on two factors: the presence of higher glucose levels in the portal vein than in general circulation (indicative of ongoing carb absorption), and the presence of sufficient active insulin. If enough insulin is fully active, the liver can absorb ingested carbs just as fast as they can be absorbed from the intestine. If not, then the glucose passes through the liver into general circulation, and cannot be subsequently absorbed by this mechanism, but must be absorbed later by peripheral tissues once insulin levels get high enough.

And a 15m pre-bolus doesn’t get insulin active fast enough…

Even fast-acting insulin does not reach peak activity for 60-90 minutes after injection, since it must be absorbed through subcutaneous tissue into the bloodstream. This means that, if no insulin is on board from previous boluses, the pre-bolus insulin doesn’t really kick in for 30 minutes or more after the start of the meal. In the time it takes pre-bolus insulin to kick in, the body might absorb 15-20g of carbohydrates, resulting in a 60-80 mg/dl rise in BG.

So, some insulin is needed sooner…

So we need to get enough insulin active at mealtime to allow the liver to do its job, but not so much as to cause low BG before or after the meal. The best way we’ve found to do this is to do a small early pre-bolus about an hour prior to a meal. We calculate the size of the early pre-bolus based on the current BG, by determining how much insulin we can safely add and still stay above 80 mg/dl for 1-2 hours. In our case, that means assuming that up to 75% of the insulin activity will occur before the meal carbs kick in. So for a BG of 110 mg/dl an hour prior to the meal, and a correction ratio of 40 mg/dl per unit of insulin, it would be safe to bolus 1 unit of insulin. That 1 U then ramps up to peak activity right at mealtime, and largely prevents any substantial rise in BG immediately after the meal.

Finally, we can time mealtime insulin based on carb absorption…

Once we’re almost ready to eat and it’s time for a normal pre-bolus, it’s important not to over-bolus for all our carbs all at once. Doing so (particularly after a successful early pre-bolus for a large meal) risks causing post-meal low BG, as insulin activity can peak before all the meal carbs can be absorbed. For example, a large meal with 90g of carbohydrates would take 3 hours to absorb, but insulin activity often peaks after 60-90 minutes. So what we have developed and incorporated into #DIYPS is a relatively simple meal-bolus algorithm that dramatically reduces high- and low-BG situations after meals. The most important feature of this algorithm can be implemented manually without #DIYPS, either via multiple boluses or via a combo/dual/“square wave” bolus. The key idea is to bolus only for those carbs that will be absorbed by the time the insulin hits peak activity. So if you have a large meal, you might decide to bolus at mealtime for only the first 30g of carbs initially (minus any prebolus), since those will be absorbed over the first 60 minutes. If the meal totals 60g of carbs, you will then want to bolus for the next 30g of carbs over the next hour, possibly via a continual delayed (“square wave”) bolus, or by doing one or more manual bolus(es) after the meal is over. (The latter strategy is similar to what #DIYPS does, in 0.5U increments, as it allows you to react if you eat more or fewer carbs than expected, or if BG rises or falls unexpectedly in the interim.)

Resulting in almost flat BG, even after large meals…

By combining all these strategies, and providing real-time feedback and alerts when boluses, temp basals, or carbs are necessary, #DIYPS has allowed us to largely eliminate post-meal hyperglycemia, while minimizing risk of hypoglycemia. As detailed previously, this has helped reduce A1c by a full percentage point, reduce BG standard deviation, and increase time in range. While such impressive results are hard to achieve without assistance, it definitely should be possible for many people with diabetes to improve their own ability to manage post-meal BG levels by adopting some of the same techniques into their own self-care.

Note: there have been some updated posts since this original post about how to easily do the “eating soon” mode approach. Take a look at these illustrations for more details on it!

Footnote

[1] A few weeks ago, we were enjoying a weekend down in Portland. Normally, Dana eats a fairly low-carb breakfast, small snacks throughout the day as needed, and ends up with a fair bit of insulin activity at lunch and dinner time. That weekend, however, we had two very large spikes in postprandial blood glucose, after a late brunch, and then again after dinner, following a hike at Multnomah Falls. The next day, we saw a much smaller post-meal rise after brunch, as she had corrected a morning low with juice, and then bolused to prevent a rebound, so that insulin was near full activity at brunch time. Subsequently, we have incorporated these insights into #DIYPS’s “eating soon” mode, and have been able to much more consistently prevent large BG spikes immediately after meals.

10 thoughts on “#DIYPS findings can help people with type 1 diabetes, regardless of tech, better manage post-meal blood glucose

  1. I see the active insulin from the other side. Morning activity, in my case running, versus late afternoon. In the morning the temp basal requirements are higher to maintain a fairly steady glucose level during the run. I usually start a temp basal 2hrs prior. In the late afternoon, 5+ hrs from my last basal, I require a smaller temp basal. The tail end of the active insulin can be significant.

  2. Thanks so much for sharing this. My 13 year-old daughter is doing a wonderful job taking care of her diabetes and calculating everything out herself, but we still have a lot of trouble keeping her blood sugar under control. The amount she needs changes drastically, almost from day to day. What you have described goes a long way towards explaining some of the patterns we have seen and some of the problems we are having, particularly after breakfast. It would be great if we could implement this by hand, but I don’t think any of us want to get up an hour before she eats breakfast. (Right now she is getting up about 20 minutes early to bolus, and then goes back to sleep.)
    If you have additional insights or descriptions of how to manage things by hand, that would be very helpful.

    1. Hi Denise, thanks for your comment! I still face the same challenge with breakfast, if I try to get up in the morning and eat carbs right away – I’m impressed she’s willing to wake up 20 minutes early to pre-bolus :). I don’t have a good solution other than someone else waking up and bolusing for her! (Or, finding a way to make breakfast later, if that’s possible.) But, hopefully some of this approach will be helpful at other meals where you do have more time before the meal, and that will make things a little easier overall. Let me know if you come up with any solutions around the timing of breakfast, I’d love to hear them.

  3. What about setting her basal rate up for the hour before breakfast since it is the same time everyday, or at least M-F?

    1. To be honest, it makes me too nervous to falsely set basal schedules to compensate for something like this…probably because I don’t have the same schedule any day of the week! I think it is a lot safer to do an approach like “eating soon mode” (some updates around simplifying the explanation are available here: https://diyps.org/2016/07/11/picture-this-how-to-do-eating-soon-mode/) if and when you actually know that you’ll be eating. Otherwise, it’s likely to lead to more lows when schedules vary and you don’t eat as expected. I’ve been using the “eating soon” approach for two years pretty effectively, and for me think it’s the best solution.

Leave a Reply

Your email address will not be published. Required fields are marked *